1 Pcs SSA 32mm Cylinder Series Single Acting Cylinder Stroke 5-50mm Single Acting Extrusion. (Color : Stroke 35mm, Size : SSA32 Bore 32 mm)

CylindersInstallation and use:1. When the load changes during work, a cylinder with sufficient output power should be selected.2. Under high temperature or corrosive conditions, corresponding high temperature or corrosion resistant cylinders should be selected.3. When the humidity is high, there is a lot of dust, or there are water droplets, oil dust, or welding slag, the cylinder should take corresponding protective measures.4. Before connecting the cylinder to the pipeline, the dirt in the pipeline must be removed to prevent debris from entering the cylinder.5. The medium used in the cylinder should be filtered by a filter element of more than 40m before use.6. Since the cylinder front cover and piston are short, the stroke generally cannot be too large.7. In low-temperature environments, antifreeze measures should be taken to prevent water in the system from freezing.8. The cylinder should try to avoid lateral loads during operation to maintain the normal operation and service life of the cylinder.9. When the cylinder is not used for a long time after disassembly, attention should be paid to surface rust prevention, and dust-proof plugs should be added to the inlet and exhaust ports.Special note: The front and rear covers cannot be removed by yourself.

• Cylinders