#10-2" | Deck Screws 5x50 mm Stainless Steel A2 Exterior Rust Resistant Screw 5mm Strong 250 Piece Wood Screws Torx 50mm Long Wood Srew incl. 1x Torx Bit

The NietFullThings terrace screws with countersunk head made of stainless steel are excellent for all plastics, particle boards, and hardwoods (terrace construction). With the help of the wobble-free TORX drive and the high-quality sliding coating, screwing is child's play. The TX internal hex drive allows for easy and secure screwing from the start to the sinking of the screw. The stainless steel wood construction screws with cutting notch and peeling ribs are versatile and guarantee high resistance to environmental influences due to their INOX material. Official European Technical Approval ETA. To avoid splitting or other damage in hardwoods or thin profiles, NietFullThings recommends conducting an application test with countersunk screws. To determine the appropriate drill size, we recommend the following rule of thumb for maximum hold: screw diameter x 0.6. Example wood screw Ø6 mm x 0.6 = 3.6 ~3.5 mm drill to pre-drill. In most cases, you do not need to pre-drill.

• 1 suitable Torx bit included in the delivery. Terrace screws stainless steel, also facade screws stainless steel, are available in material classes C1, V2A, and V4A. The V2A screws are among the weather and corrosion-resistant screws made of stainless steel. The screw assortment is ideal for Ipe, Teak, Cumaru, and Sucupira wood. The round head screws are the right choice for every professional craftsman and hobby screwer.
• Technical data (see images): Length (l) = 50 mm | Head diameter (dk) = 7.95 mm | Head height (k) = 3 mm | Drive = TX25 | Thread length (b) = 32 mm | Diameter (d) = 5 mm | Drive shape = Internal hexagon | Thread type = Wood thread | Head shape = Decorative head | Tensile strength = 700 N/mm² | Material = V2A 1.4301 AISI 302 | Corrosion resistance class (KWK) = 1-2 At the bottom end of the Torx screws for terrace boards, there is a cutting notch.
• Applications: The lens head screws made of stainless steel V2A can be used in all common areas where no de-icing salt (chlorides) is used. If the installation site is in maritime proximity, stainless steel screws of class V4A should be used to avoid corrosion. The V2A screws have a lower carbon content. Therefore, these screws are somewhat softer and cannot be hardened. When working with hard woods, pre-drilling is necessary.
• From a technical perspective, pre-drilling can be omitted for some softer types of wood. When it comes to achieving a perfect result, pre-drilling or countersinking should be done before the stainless steel wood screws are inserted. In too hard wood, the decking screws can tighten and the head can break off. Pre-drilling also prevents the splitting of the wood plank. Additionally, there are no unsightly cracks in the area of the decking screws.
• The countersunk screws for wood are available in various sizes. Everyone can assemble their personal stainless steel screw set as needed. From a variety of differently sized packages, the quantities can be adjusted to the respective project. Thanks to the rust-free inox branded stainless steel, a high-quality product in industrial quality is always delivered.