24.8x12.2x12.6in Mini Metal Lathe, MT2/MT3 Stepless Speed Regulation With K11-80 Three-jaw Chuck, 0.4~2.0mm Lathe Thread Range, Precision 0.01mm For Home DIY Small Table Lathe Metalworking Turning

Product parameters:Model: 0618/200/220VSpindle accuracy: 0.01-0.02mmWorkpiece length for two ejectors: ≤200mmRotation diameter on bed: ≤180mmRotation diameter on horizontal support plate: ≤110mmSpindle inner hole taper: MT3Spindle through hole taper: 20mmTailstock sleeve taper: MT2Motor rated current: 4AMiddle slide stroke: 65mmTool holder slide effective stroke: 35mmSpindle speed (stepless electronic speed change):Low speed 0~1100 rpmHigh speed 0~2500 rpmAutomatic longitudinal feed rate: 0.1~0.2mmMetric lathe thread range (10 minutes): 0.4~2.0mmMotor rated power (output): 400WVoltage/frequency: 230V/50HzChuck outer diameter: 80mmNet weight/gross weight: 35/40kg/77.16/88.18lbMachine size: 630x310x320mm/24.8x12.2x12.6inPackaging size: 660x330x330mm/26x13x13in

• 【Product parameters】: spindle accuracy: 0.01-0.02mm, two-thimble processing workpiece length: ≤200mm, rotation diameter on the bed: ≤180mm, rotation diameter on the horizontal support plate: ≤110mm, spindle inner hole taper: MT3, spindle through hole taper: 20mm, tailstock sleeve Taper: MT2, Motor rated current: 4A, Middle carriage stroke: 65mm, Tool carriage effective stroke: 35mm, Spindle speed (stepless electronic speed change): Low speed 0~1100 rpm | High speed 0~2500 rpm, Longitudinal
• 【Material】: Mini metal lathes are made of high-quality HT200 cast iron, which is strong and wear-resistant. They are equipped with wear-resistant and sturdy metal gears and aluminum alloy handwheels to ensure a longer service life.
• 【High precision】: spindle precision 0.01-0.02mm, longitudinal automatic feeding amount 0.1~0.2mm, metric lathe thread range (10 minutes) 0.4~2.0mm, can be used to process precision parts and models, spindle can rotate forward and reverse, speed range is 0-2500RPM stepless speed change.
• 【High-quality stepless speed lathe】: stepless speed table lathe has a simple structure and is easy to install and operate. The motor transmits the speed gear through the synchronous toothed belt to drive the spindle speed of the lathe (there is an adjustable gear behind the lathe). The spindle can be adjusted to the required speed at will to achieve the cutting effect.
• 【Applicable materials】: This lathe can obtain the corresponding thread pitch by replacing the exchange gear, so that the lathe can turn the thread using the longitudinal automatic feeding mechanism. It is used to process internal and external cylindrical surfaces and end faces, as well as drilling, reaming, reaming, boring, tapping, milling, knurling, etc. It is suitable for families, small workshops, teaching, and DIY enthusiasts.