2PCS CV Boot Repair Kit with 4 Tie Rod Boots Clamp & 6 Cable Ties,Thickened CV Axle Boot Repair Kit for Protecting Drive Shafts,Professional Joint Boots Car Accessories

AUTOMOBILE CV AXLE BOOT KIT—PROTECTING TRANSMISSION JOINTS FOR SMOOTHER AND SAFER DRIVINGProduct AttributesColors: BlackSizes: 4.72×3.54×3.54 inchApplicable Caliber: 2.55 inch/65 mm, 3.14 inch/80 mm, and 3.54 inch/90 mmWeight: 8.3 ozMaterial: SiliconePackaging: 2 x CV Boots + 2 x Large Clamp + 2 x Small Clamp +6 x Nylon Cable TiesStrongly Recommended: Before placing an order, please be sure to measure and check the size and caliber data of the product you need, to avoid mismatch after purchase (please allow a slight deviation in manual measurement data)Installation StepsRemoving the old CV axle boot1. Remove the clamp: Use pliers or a specialized tool to remove the metal/plastic clamp from the old CV axle boot2. Remove the CV axle boot: Pull the old boot off the drive shaft and clean off any remaining greaseInstalling the new CV axle boot1. Apply grease: Apply specialized grease evenly inside the universal joint and on the balls2. Install the new boot: You can use a CV boot expander tool to assist in installing the new CV axle boot. First, insert the smaller end of the new boot onto the driveshaft, keeping the correct orientation (the larger end facing the universal joint)3. Secure the clamps: Use a specialized clamp tool or pliers to tighten the metal clamps, keeping proper sealingProduct Feature & Functions1. High-resilience silicone material tightly wraps around the ball joint, effectively blocking out mud, water stains, and road debris, avoiding lubricant leakage, and extending the life of the transmission system2. Special synthetic silicone formula resists engine oil and high temperatures, remaining flexible and crack-free even during intense driving or long-distance travel

• Buyer's Guide: Axle boot is 4.72 inch in length and small port inside diameter is 0.78 inch, and contains three different calibers: 2.55 inch/65 mm, 3.14 inch/80 mm and 3.54 inch/90 mm. Please check the size data you need before purchase
• Tight Protection: This CV joint boot is custom-designed for drive joints with a fully enclosed design and a tight-fitting structure that keeps out mud, dust, gravel, and other external impurities, solving the problem of component wear caused by impurities
• Wear-resistant and Durable: This CV boot kit is made from thickened materials. It is tough and resilient, and will not deform or crack even after prolonged use, despite the friction and pressure generated by the high-speed rotation of the ball cage
• Installation: 1. You can use pliers to remove the old dust cover. 2. Apply grease evenly inside the universal joint. 3. Use the CV boot tool to first insert the small diameter end onto the drive shaft, with the large diameter facing the universal joint
• Complete Accessories: This CV joint boot kit contains 2 CV boots, 4 stainless steel clamps, and 6 nylon cable ties. Our kit provides all the installation accessories you need, avoiding the need to purchase other auto parts separately