3" Stroke Micro Electric Linear Actuator 12V - 32N/7.2lb Speed 1.2"/sec Mini Waterproof Metal Mini Motion Actuator with Mounting Bracket for DIY Robot Cabinet Drawer Shutter Cosplay

UYGALAXY Micro Linear Actuator for up and down, which is used for your home, such as home automation, cabinet door, drawer, shutter. And also used for your DIY project, such as robot arms, toys, cosplay. Great for electric open chicken coop/pigeon/rabbit cage/pet nest door. Specification: Input Voltage: DC 12V Working current: 0.2A Stroke Length: 3in/75mm Retracted Length = 130 mm( 5.1”) Extended Length = 205 mm( 8.1”) Material: Aluminum alloy Load capacity: 7.2lb/32N Speed: 1.2"/sec(30mm/s) Waterproof Protection: IP65 Duty cycle: 10% Working Temperature: -13℉~+140℉ Feature: Low noise design, noise level less than 50dB. Compact size and lightweight, easy to install with mounting bracket. Built-in limit switch that it will turn off power when the device reaches the end of stroke to protect motor. It will hold its position when the power is off. Made of high quality aluminum, more safe & well constructed for long-term use. How to protect your actuator? The actual load does not exceed the rated load. Please use the 12V DC power battery. If use smaller voltage, product can not work well, use bigger voltage maybe will damage to the product. It should be noted that the mini linear actuator is in extreme operating conditions for a long time will reduce product life. Please don't store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce motor efficiency. When soldering is required on the positive and negative power supply's motor terminals, the soldering iron temperature is 340°C±40°C. Within 3 seconds of heating time. Package Included: 1 x Mini Linear Actuator 2 x Mounting Brackets

• Spec: 12VDC Linear Actuator Stroke Length= 3inch(75mm); Travel speed= 1.2 inch/sec (30 mm/s), force 32N(7.2lbs), IP65 waterproof, made of metal material for indoor outdoors.
• Made of Metal Material: Our micro linear actuator made of high quality aluminum, the both ends made of metal material, it's updated design to avoid the extend and retract rod breaks when overweight. Built-in limit switch that can stop at any position, automatically stop when It reaches the top.
• Special low noise as designed: level under 50dB, it has been carefully considered for the ears of your family and neighbours.
• Widely used: Lightweight and compact motion linear actuator, suitable for your DIY project. Like pet feeder, home automation, robot's gripper, toys, cabinet door, drawer, shutter and so on. When Halloween festivals or cosplay show coming, it enhences your wearable devices, like the spread wings for hawk cosplay.
• Easy set up & Safe: Quick mounted by using brackets, and easy connect the actuator to your 12-volt safe power supply. Package included 1 mini linear actuator and 2 bracket sets.