304 Stainless Steel Immersion Wort Chiller, Cooling Coil Tube with Water Adaptor & Silicone Tubing Heat Exchanger Homebrew Beer Cooler

Descriptions: 1.The wort chiller can be used for cooling the beer or hot malt. 2.The cold water can flow through the tube,then absorb the heat from the wort mix and reduce its temperature. 3.It is convenient to use,make the equipment directly into the hot wort,and then connect with the liquid from the faucet. 4.Also easy to clean,only need to wash the outside position. Specification: -->Material: 304 Stainless Steel -->Overall Height: 35.5cm -->Coil Diameter: 3/8 inch (9.52mm) -->Tube Thickness: 0.5mm -->Coil Length: 8M -->Coil Height: 10cm -->Coil Width: 23.5cm Packing List: 1*Immersion Chiller 1*Water Adaptor 1*Silicone Tube

• Convoluted internal coil gives the wort greater surface area for contact with the cold water. Reduces the amount of water needed to cool the wort! Wort runs through one tube, while the cold water runs through another tube allowing for the shortest possible cool off times.
• Advantages of Using an Immersion Chiller: There is a minimal risk of contamination as brewing wort is not cycled through a separate container. Clean up is easy too. You only need to wash the outside.
• Immersion cooler is the guarantee for the production delicious craft beer, brewed by yourself in the comfort of your own home. Perfect for the kitchen homebrewer that is making extract batches.
• Wort chiller is used for cooling beer or malt. Cooling the cooked wort fastly,let the wort reach the preference temperature of Yeast inoculation.
• Stainless Steel Construction: Solidly constructed of 304 stainless steel. Stainless steel is more durable towards wearthan copper, easy to clean,no rust and no effect on the taste of the mash