6 In. Vacuum Chamber Heating Pad

★★★★☆ 4.0 36 Bewertungen

€36.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.castellidiario.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€36.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 23.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.castellidiario.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 211002465 Erscheinungsdatum 2026/04/04 Listenpreis €36.00 Modellnummer 211002465
Kategorie

This heat pad is super precise and will adhere to the base with a peel and stick backing. Depending on the environment and air movement, the actual temperature may hold within a degree. Simple standoff bumpers will provide thermal separation from the work surface. You can leave the heater on for months without significant increase to the energy bill. The pad has a heating function (not refrigerating) and should not be touched by hand to avoid scalding. Min Temp, Max Temp, Offset, and other safety features can be programmed with UL listed Fahrenheit/Celsius digital controller. Heating will not be achieved, and we can’t stress this enough if the heating pad does not properly cover the bottom of the chamber. Your best bet is to purchase a pad that matches the respected size of your equipment. This ensures not only a nice heat spread but also a preventative measure that reduces heat sink. So the set temperature will be different from the actual inside temperature. For example: If you set the 3-gallon chamber in the image above to 110F the actual temp on the bottom surface of the chamber will read at about 101F on the thermal label. This is assuming you have a thermal laser gun to shoot the temps. Since the inside is reading 101F and the controller is set to 110F your offset is 9F, so what you want to do is add 9 degrees to the heat setting (119F) which will bring the inside surface of the chamber to your desired 110F.

  • Chamber NOT included, sold separately. Heat pad must fit correct size of chamber! Fits all competitor 3 quart Pyrex and 3 gallon chambers! fits our 2,3, and 5 gallon aluminum pots and 1 Gl flat chamber
  • UL listed Fahrenheit and/or Celsius
  • Min Temp: ambient + 5 / Default Max Temp: 160F / Accuracy: +/-1.8℉
  • Voltage: 110 VAC / Range of Set Temperature: 0-248℉
Manufacturer CQ Ventures
Is Discontinued By Manufacturer No

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4 von 5
★★★★☆
36 Bewertungen | 15 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
75% (27)
4 Sterne
8% (3)
3 Sterne
4% (1)
2 Sterne
2% (1)
1 Stern
11% (4)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.