AeroMarine Rock and Pebble Paving Epoxy Resin Kit 3 gallons

300/21 non-blushing cycloaliphatic clear epoxy system is ideal for many applications; especially pebble paving, pebble resurfacing, pebble repair, and pebble or stone decking. It goes on thin, but cures strong holding pebbles in place with a beautiful high gloss finish. Easy to mix and easy to apply, just mix it up, pour into a paint pan, and roll it out like you’re painting a floor. Work life: 30 minutes at 70F. Cure time: 24 hours at 70F. The mix ratio is a simple 2:1 by either weight or volume. This kit does not contain pumps. Consists of two gallons of #300 resin and one gallon of #21 non blushing cycloaliphatic hardener. Color in containers varies. Epoxy is not uv resistant and will yellow in sunlight.

• HIGH GLOSS FINISH – Restore your pebble paving installation to its original high sheen finish with AeroMarine Products High Gloss Finish Epoxy!
• THIN, EVEN COATING – Low-Viscosity 300/21 Epoxy penetrates the pebble matrix and coats them evenly to ensure even and full coverage!
• 600 SQUARE FEET OF RE-COAT COVERAGE – Easily reseal a 20x30 driveway or garage!
• NO AMINE BLUSH – Non-Blushing epoxy means that you don’t have to finish the surface after the epoxy cures; just roll it on and wait for it to take care of itself!
• EASY DIY APPLICATION – No special equipment needed, just a mixing bucket, a stir stick, a paint tray, and a medium nap paint roller.