AMALIE Blue HI-Temp NLGI Grease # 2 (160-68320-18) 120 LB KEG | Made in USA

AMALIE Blue Hi-Temp Grease is a premium, heavy duty, EP Multi-purpose lithium complex grease fortified with polymers, anti- wear agents, tackiness additives, high viscosity base oils plus rust and oxidation inhibitors. This grease is designed to "stay-in-place and lubricate" under the most severe operating conditions found in industrial and automotive service. It has excellent resistance to water wash out and protects against wear in shock loading applications. AMALIE Blue Hi-Temp Grease is designed to “stay there and lubricate” under the worst conditions of water, dirt, and mud. This grease is capable of operations from minus 10 degrees F to 375 degrees F, but with a dropping point of more than 500 F. AMALIE Blue Hi-Temp Grease is recommended for wheel bearings, including disc brake applications, fifth wheel, u-joints, steering linkage, and chassis lubrication. It is an ideal chassis lubricant for on & off-road equipment in agriculture, construction, logging, trucking and mining service where severe water washing, or shock loading protection is needed. AMALIE Blue Hi-Temp Grease is also recommended for rock crushers, sand and gravel screens, oil field equipment, offshore drilling equipment and marine deck equipment. It may be used for industrial plain bearings and anti-friction bearings operating under shock-loads or wet and dirty conditions at speeds less than 5000 RPM.

• Adhesive-Tacky Grease That "Stays in Place and Lubricates"
• Excellent Water Wash-Out Resistance
• Excellent Protection Against Failures Caused by Shock Loading
• Extreme Pressure Protection - Exceeds 70 Pounds OK Load in the ASTM D-2509 Timken Test
• Outstanding Rust and Corrosion Protection
• Distinctive Blue Color Quickly Identifies the Grease and Helps Detect Defective Bearing Seals
• Oxidation Inhibitors Permit Operations Up to 150°C (302°F) for Extended Periods
• NLGI Certified GC-LB in Wheel Bearing and Chassis Applications