ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 4 2 Mars Series LCD/DLP/SLA 3D Printer Models, with Twistable Gooseneck Light

★★★★★ 4.5 75 Bewertungen

€40.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.castellidiario.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€40.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 24.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.castellidiario.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 211766731 Erscheinungsdatum 2026/04/04 Listenpreis €40.00 Modellnummer 211766731
Kategorie
  • 【Localized Strengthening, Uniform Curing】The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new arrangement of light beads and Lens light source, wash and cure 3’s curing uniformity has been enhanced by 20%, bringing in a more thorough and comprehensive curing of the entire model
  • 【Larger Wash&Cure Size】Anycubic Wash & Cure 3’s maximum cleaning volume is up to 165*100*180mm, The total volume of the cleaning bucket has been expanded to 4L. The curing size is up to 160*180 mm, to accommodate larger and more models for single post-processing session
  • 【Detergent Saving】Anycubic wash and cure 3 machine's double-layer PP material cleaning basket designed with two heights at 3.93'' and 6.5’’, to flexibly accommodate print platforms from 5.9" to 7.3". The amount of IPA used can be adjusted according to the heights of the model to achieve savings
  • 【Wide Compatibility】Enlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 4/2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3'' and below available on the market
  • 【Simple Operation, Quiet and Efficient】One click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, 1 to 30 minutes adjustment. Besides, The decibel when the machine is running does not exceed 65db and will not disturb normal life and work

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.5 von 5
★★★★★
75 Bewertungen | 31 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
83% (62)
4 Sterne
4% (3)
3 Sterne
2% (2)
2 Sterne
1% (1)
1 Stern
10% (8)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.