AuInLand CV Joint Boot Tool with Adjustable Clamps (4 Small, 4 Big) for Auto ATV UTV

CV Boot Clamps ▪ Material: 304 Stainless Steel(long durability and reliability) ▪ Quantity: 4 pieces small crimp bands + 4 pieces big crimp bands ▪ Big Clamp: Length 17.13 in. Width 0.31 in. Maximum diameter 4.72 in. ▪ Small Clamp: Length 7.6 in. Width 0.31 in. Maximum diameter 1.81 in. ▪ Bearing Temperature: Max. 800℃ ▪ Tensile Strength: Max. 520 MPa ▪ A perfect replacement for your car broken drive shaft CV boot clamp. CV Joint Ear Clamp Banding Tool ▪ Type: 2 Kinds ▪ Material: Carbon Steel Jaw and Non-Slip Grip Handle ▪ The plier head is hardened. Rust and corrosion resistant. ▪ Non-slip insulated handles, allowing you to get the job done comfortably and efficiently. ▪ Applications: Widely used on CV boots, coolant and fuel lines, air pressure systems, compressors and other cooling system hoses. | Plier works on steering gear gaiters and fuel hoses on most cars. Ear Clamp Plier ▪ Length: 8.96 in ▪ Jaw Max. Opening: 1.14 in ▪ Slim Head Design: The plier could easily enter in confined areas and will not damage the press points on the ear clamps. ▪ For simple and reliable clamping of single ear hose clamps and double ear clamps. ▪ Tip: Little oil on the the surface to keep the pliers free of rust, it will not effect the function. Just wipe it clean with a rag or old towel. CV Joint Clamp Plier ▪ Length: 8.76 in ▪ Handles on both side are able to rotate 360 degree. ▪ With built-in cutters and winders, the banding can be tightened and cut quickly and effectively. ▪ Installation: 1. Wrap free-end clamps 3/8"" or 1/4"" roll band and clip around and clip around boot. 2. Place a 1/2"" ratchet wrench on the winding mandrel and turn. When sufficient tension has been applied, rotate the tool over the boot, bending the band back onto the clip. 3.It applies tension and has a built-in cutter. 4. To complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip.

• CV Boot Clamp Set: Including 4 pieces big crimp bands(Length 17.13 in. Width 0.31 in. Maximum diameter 4.72 in.) and 4 pieces small crimp bands(Length 7.6 in. Width 0.31 in. Maximum diameter 1.81 in.). All these cv clamps are made of 304 stainless steel made for long-time use
• Applications: There are 2 Kinds CV joint boot clamps pliers for fast and simple tensioning and securing of CV boot banding strap. | This cv boot banding tool is widely used on CV boots, coolant and fuel lines, air pressure systems, compressors and other cooling system hose
• Ear Clamp Plier: Slim Head Design make the boot clamp plier easily enter in the confined areas wiithout damaging the press points on the ear clamps. For simple and reliable clamping of single ear hose clamps and double ear clamps
• CV Joint Clamp Plier: Handles on both side are able to rotate 360 degree. With the built in cutters and winders on the cv clamp plier, the banding can be tightened and cut quickly and effectively
• Materials: The head of the ear boot tie pliers is hardened. Rust and corrosion resistant. Non-slip insulated handles allow you to get the job done comfortably and efficiently
• Note: This cv boot clamp repair tools include 4 pieces Small CV Boot Clamps, 4 pieces Large CV Boot Clamps, 1 piece Ear Clamp Plier and 1 piece CV Joint Boot Clamp Pliers. Please feel free to contact us if you have any question about the product. We would try our best to solve it for you