Brewing Pump(Switch)+ Wort Chiller

Brewing Pump(Switch)+ Wort Chiller

• Safely Transfer Liquid: note: This is a magnetic drive pump, not a self-priming pump, please install the pump at least 12 inches lower than your vessel, the pump needs to be filled with liquid before turning on the power, otherwise the liquid will be transported extremely slowly (mishandling). Not for use with high viscosity liquids.Transferring liquids is an important part of any brew operation, and the easiest and safe way to transfer liquids is to use the magnetic pump, the propeller will mag
• Quiet and Efficient: The main shaft is separated from the impeller, which has a damping and anti-vibration function, to reduce the influence of motor vibration during work. Realized a high-efficiency smooth running, and excellent quiet circulation. Solid Magnetic Pump--Fully-sealed magnetic pump, the motor connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. A High output volume and quiet operation pump. Great heat resistance up to 120℃/ 248F. Pl
• Quickly Chilling Beer Wort: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours
• Easy To Clean Out: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage
• Can Work With Water Pump: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water