Brilluxa Motorcycle Lift, 1100lb 500kg Hoist Stand with Safety Lock, Hydraulic Lift Jack for Garage and Repair Shop Maintenance

Item Type: Motorcycle HoistMaterial: IronSize: Approx. 45 x 15 cm / 17.7 x 5.9in (Length x Width)Maximum Adjustable Height (Height From the Ground): Approx. 440mm / 17.3inThe Bottom Adjustable Height (Height From the Ground): Approx. 150mm / 5.9inBearing Weight: 500kg (1100LBS)Configuration: Lock With Safety DevicedescriptionThe motorcycle lift can load up to 500 kg, and the height from the ground can be manually adjusted115-440mm. When the lifter is working, there is an installation lock to directly lock it; to prevent potential safety hazards! In addition, through the spindle drive, the lifting speed can be precisely adapted. Through the hole on the side, it can be screwed on the ground and more stable. Therefore, the motorcycle lift is very suitable for use in the workshop and hobby use. That is, the carrier plates are rubberized and high and recorded rubber so that they can be easily adapted to every motorcycle.How to Use:1. The maximum load capacity is 1100 pounds (500 kg), please do not exceed the rated load capacity2. Only used for the second lift, don't use it for other purposes.It is not executed by the designer.3. Keep children and unauthorized persons away from the work area.4. When operating the lift, you should wear safety goggles approved by the National Security Agency.5. Only use this lift on a big stable, level, dry, non-slip motorcycleKeep the surface clean, tidy, free of irrelevant materials, and ensureWith adequate lighting,6. Always keep your hands and feet away from the work area.7. Do not allow untrained persons to operate the lift.8. Don't make any changes to this elevator.9. Do not expose the lift to rain or snow.10. Make sure you read, understand and apply safety instructions and warningsFailure to follow these instructions may result in property damage or personal injury.Maintain:1. When not in use,

• Equipped with 2 screw adapters, which can realize height adjustment, from the ground can be manually adjusted range 115‑440mm.
• Detachable crank handle, easy for repairment operation, add extra bolts to make sure safety.
• Suitable for most motorcycle , including cruisers, can be ATV, UTVS, dirt bikes, snowmobiles, etc.
• Easy to operate, just rotate the metal crank to lift the motorcycle easily, ideal for garages, shops or repair shops.
• Wide surface plate, can load up to 500 kg, when the lifter is working, it is directly locked with an installation lock to prevent safety hazards.