Canria K8 Artnet+Dmx Console Led Controller, Suitable For Spi And Dmx512 Led Light, Online Offline, Addressable Programmable, 1G

Canria T8K.Net Artnet+Dmx Console Led Controller Instructions 1.Voltage: Ac110V-220V 2.Rated Power: 4W 3.Ports Number: 8 4.Max Controller Pixels Offline Or Connected Dmx Console: Ordinary Single Line Lamps: 8192 Pixels(1-1024 Pixels Per Port), Dmx512 Lamps: 2048 Pixels(1-256 Pixels Per Port), Using With Madrix: Ordinary Single Line Lamps:8160 Pixels(170-1020 Pixels Per Port)(1-4 Domains), Dmx512 Lamps: 1360 Pixels(1-170 Pixels Per Port). 5.Working Temperature: -10?~45? 6.Size: 300*150*45Mm 7.Net Weight: 1.2Kg 8.Sd Card: 1Gb, Fat Or Fat32, *.Led 9.Support Multiple Synchronization. 10.Can Control 32-65536 Grayscale, Gamma Software Correcting Processing. 11.Support All Kinds Of Light Source Of Point, Line And Surface. Fits For Regular And Irregular Shape Of Lights Project. 12.Application Most Of Led Lights With Single Wire Ic Chips: Ucs19**, Ucs29**, Tm18**, Ws281*, Sm1670*, Gs8205, Gs8206, 6812, Tm1914, Lpd1886, Dmx512, Ucs512, Ws2822 Etc. 13.When One Port Of The Controller Is Connected With No More Than 512 Pixels, The Playback Speed Can Reach 30 Frames/Second. If More Than 512 Pixels, The Frame Rate Will Automatically Decrease As The Number Of Pixels Increases. 14.The Output Of Ttl, The Controller Must Share The Ground With The Lamps. (That Is, The Ground Wire Output Of The Controller Connect With The Ground Wire Of The Lamps). 15.If Multiple Controllers Are Synchronized Offline, The Sd Card Must Be Of The Same Specification. For Example, If 1G Card Is Used, Each Controller Needs The Same 1G Card. The Card Reading Speed Of Different Sd Cards May Be Different, Which Will Affect The Synchronization Effect, And Each Sd Card Must Be Formatted Into The Same Type (Fat Or Fat32). 16.Before Copying Files To The Sd Card, Format The Sd Card Into ''Fat'' Or ''Fat32'' Format.