Car COP Ignition System Detector ADD750 Automotive Ignition Coil Test Detector, 500288235

Specification: Item Type: Ignition Coil Tester How to Use? 1. Correctly connect the connector and sensor head to the tester. 2. The induction head is aligned with the ignition coil to start working, and the working status of the ignition coil is judged according to the result of lighting. Test Results: Red Light: Consistent, steady flashing and beeping indicates the COP is producing the correct amount of voltage. No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage. This may be caused by one of the following: 1. Fouled , or incorrect space 2. Damaged/corroded wires or connectors 3. Faulty coil or Green light: Consistent and steady flashing indicates the duration of the arc is correct. No response or an inconsistent response indicates the duration of the arc is NOT correct. This may be caused by one of the following: 1. Shorted windings inside the coil 2. Resistance or bad connections in the 3. primary / secondary connections 4. Faulty coil Material: ABS colour: As shown Package Contents: 1 x Ignition Coil Tester(without ) 1 x Lever 1 x Sensor 1 x Storage Bag Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• Designed to easily and quickly determine whether the COP produces the proper spark for the plug.
• Once the signal is received, the tester determine whether the COP produces the correct amount of voltage and arc duration.
• Hand‑held Coil On Plug fast ignition tester, powered, with stable and professional .
• It works by receiving the signal from the secondary ignition coil, and the test result is accurate and reliable.
• If the voltage is correct, the tester beep and the red indicator flash; if the arc duration is correct, the green also