Car COP Ignition System Detector ADD750 Automotive Ignition Coil Test Detector

Beuiouer Specification:Item Type: Ignition Coil TesterHow to Use?1. Correctly connect the connector and sensor to the tester.2. The induction is aligned with the ignition coil to working, and the working status of the ignition coil is judged according to the result of lighting.Test Results:Red LED Light:Consistent, steady flashing and beeping indicates the COP is producing the correct amount of voltage.No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage.This may be caused by one of the following:1. Fouled , or incorrect space2. Damaged/corroded wires or connectors3. Faulty coil or PCMGreen LED light:Consistent and steady flashing indicates the duration of the arc is correct.No response or an inconsistent response indicates the duration of the arc is NOT correct.This may be caused by one of the following:1. Shorted windings inside the coil2. Resistance or bad connections in the3. primary / secondary connections4. Faulty coilMaterial: ABScolour: As shownPackage Contents:1 x Ignition Coil Tester(without battery)1 x Adapter Lever1 x Sensor1 x Storage BagOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• Hand‑held Coil On Plug fast ignition tester, battery powered, with stable and professional performance.
• Once the signal is received, the tester determine whether the COP produces the correct amount of voltage and arc duration.
• Designed to easily and quickly determine whether the COP produces the proper spark for the plug.
• It works by receiving the signal from the secondary ignition coil, and the test result is accurate and reliable.
• If the voltage is correct, the tester beep and the red LED indicator flash; if the arc duration is correct, the green LED also