Car Jump Starter Clamps, 10AWG EC5 Jump Starter Cables with Battery Clamps, 12V Automotive Booster Clamp Cables Replacement Alligator Clamps, Portable Smart Jumper Starter Clamps

Specification:Material: Copper-plated Tin Wire, PVCQuantity: 1 PCSColor: Black+RedWeight: 0.4 lbVoltage: 12 VFeature: Smart, Safe, PracticalFit Type: Universal FitPrecautions for use:-Please do not reverse the order of operation of the starter.-Please be careful when using, this product can not be overloaded, check the power supply of the device before use.-Please remove the product from the vehicle within 30 seconds after the vehicle is started to avoid causing accidents.-Please check the voltage and current values before use.

• 【Wide Range of Applications】: This product is equipped with a standard EC5 male plug and is used as a spare replacement starter cable clamp kit for most brands of 12V mini portable jumper boxes. It has 650A max power, and is compatible with most car mini portable starters and mobile chargers for starting a dead or low car battery.
• 【Multiple Protection】: With built-in high and low voltage, high and low temperature, over-current, reverse connection, over-charging, short circuit, reverse charging, over-discharging, power outage, anti-vibration and other multiple protections, you can use it with more peace of mind.
• 【Reliable Quality】: 10AWG Copper-plated tin wire conducts electricity well and transmits current efficiently. PVC insulated sleeve resists abrasion, aging, waterproof and corrosion. Sturdy crocodile clamps have strong biting force, not easy to fall from the battery posts, with stable and reliable connection.
• 【Practical Design】: Adopting anti-reverse plug design, it will sound an alarm and then cut off the power after reversing the connection, protecting the car and starter, making it safer to use. The strong crocodile clips have dual conductive interfaces with top and bottom connection, and the battery will start as soon as it is connected.
• 【Procedure for Use】: First, connect and start the smart clamp to the 12V port, you will see the red and green lights flashing. Then, clip the red clamp to the positive post of the battery and the black clamp to the negative post. Finally, enter the car and start the car after seeing the indicator light in constant green.