DJI LiDAR Range Finder (RS)

Accessory Port:Cold Shoe1/4"-20 Mounting HoleUSB-C PortUSB-C Power/CVBS/CAN Data Port Image Sensor:Resolution: 448×298 on the touchscreenFOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)Focal Length: 30mm equivalent ToF sensor:Resolution: 240×180Sensing Range: 0.5-14 mDistance Error: 1% Machine Learning:Can recognize up to five targets at the same time, and choose one to follow.Identification Distance: 9 m Electrical Properties:Power Consumption: 6.8 WInput: 7 to 16 V Operating Temperature:-20° to 45°C (-4° to 113° F) Mechanical Properties:Dimensions: 66×57×24 mm (L×W×H)Weight: Approx. 130 gMounting Plate Height: 30 mm Lenses that Do Not Needs Calibration:DZOFILM Vespid Cyber 35/50/75 mm

• The LiDAR focusing system makes focusing easier for hand-held shooting, without relying on the surface texture of the subject. This is especially useful in low-light environments and results in exceptional focusing capabilities.
• The new LiDAR Range Finder (RS) can project 43,200 ranging points, detect within a 14-meter range, [1] and has a built-in camera with an equivalent focal length of 30 mm and a wide FOV of 70°, which can handle the focusing needs of most scenarios. Pairing with the new Focus Motor (2022) also makes autofocus on manual lenses possible after calibration.
• 14m range and has a built-in camera with a 30mm-equivalent focal length and 70° FOV. Enables autofocus on manual lenses and enhances tracking.
• In The Box：LiDAR Range Finder (RS) × 1, Multi-Camera Control Cable (USB-C, 30 cm) × 1, LiDAR Control Cable (USB-C, 30 cm) × 1.
• Compatibility: DJI RS 4 Pro, DJI RS 3 Pro