Dura Heat DFA220CV 180K-220K BTU Kero Forced Air Heater with Dual Heat Control, White/Black

This commercial grade 210,000 BTU portable kerosene forced air heater by Dura Heat allows user set back of BTU output to minimize fuel consumption and extend operating time. It features a heavy duty ceramic ignitor, an integral auxiliary power outlet, fuse protected electrical system, one-touch electronic start ignition, a built-in air pressure gauge, run time fuel gauge, a high capacity sealed fan motor, digital diagnostics, LED temperature indicator, a built-in thermostat and an extension cord wrap. It also features a large capacity 13 gallon fuel tank with tank drain plug. This multi-fuel capable heater has been tested with K-1 kerosene, #1 and #2 fuel oil and diesel, JP-8 and Jet-A fuels. This powerful heater provides efficient temporary heat for all construction and outdoor applications. Built tough to operate in rough conditions and extreme cold. Economical to use and packs all the features you need in a workspace heater. Flat-free cold weather wheels and handle kit included Requires 120V grounded outlet for proper operation. Attention: In order to prevent potential Kerosene spills from Dura Heat brand kerosene indoor heaters and/or kerosene forced air heaters, all fuel should be properly removed from the kerosene heater fuel tank prior to transportation of the heater or disposal of the heater for any reason. Fuel can be removed by operating the heater until the fuel is emptied from the tank, or by physically removing the fuel. Owner/Operator of the heater is responsible for the safe removal of fuel from this heater; all fuel removed from the fuel tank needs to be properly stored or disposed of according to all federal, state, and local regulations. In the event of non-compliance to proper fuel removal/disposal, the owner/operator is responsible for any and all monetary fines and/or penalties. State and local restrictions may apply. Please verify permitted uses in your area before purchasing.