E6000 is formulated to meet high performance industrial requirements. The self-leveling formula forms a powerful bond with most any material and will remain flexible once cured. E6000 Industrial will handle just about any project DIYers or PROs throw at it!

• 1. Tough – 2X stronger and 60X more flex than Polyurethane! 
  2. Non-flammable once cured 
  3. Chemical resistant – safe for applications exposed to dilute acids and dilute caustics 
  4. Waterproof
  5. Washer/Dryer safe
  6. Paintable – paint to match surrounding area to make UV-resistant 
  7. Temperature resistant – unaffected by extreme heat or cold once cured 
  8. Flexible – excellent for bonding items subject to vibration

• For use on:
  Jewelry
  Fabric
  Wood
  Ceramic&More
• In the home & on the Job products
• 1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
  2. TUBE: Puncture inner seal using pointer cap (if tube has a foil seal). CARTRIDGE: Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
  3. Apply directly to surfaces to be bonded or repaired.
  4. Allow 24 hours for curing–Maximum bond strength may not be reached for up to 72 hours.
  5. TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle.
  6. Clean uncured adhesive with acetone or citrus-based solvents.