FLIPSKY FT85BD Dual ESC 84V 200A with Aluminum Case Non-VESC for Electric Skateboard/Scooter/Ebike Speed Controller/Electric Motorcycle/Robotics

Note: USB cable black or white will be shipped randomly.Specifications : Firmware: V1.4 or above (firmware update via Flipsky ESC Tool supported)Voltage: 14-84V (safe for 4S-20S)Continuous Current: 100A / Single; 200A / Dual (values depend on the mounting and ambient temperature around the device!)Peak Current: 250A / Single; 500A / DualCommunication Ports: USB, CAN, UART, PPM, ADCInput Signals Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only at present), PASStartup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored), Encoder (ABI, AS5047 encoder SPI interface)Multiple Speed Gear levels: Low, Medium, High, ReverseFront Lights, Rear Brake Lights & Horn: SupportProgrammable: YesRegenerative Capacity: YesSlide Poweron & Auto shutdown: YesSelf-resetting switch with green LED button Diameter: 16mmPower Wire Size: 10AWG; Motor Wire Size: 12 AWGSize: L132*W81*H26.5mm(Including Alu. Case)Features:Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.240MHz and the max PWM switching frequency 45KHz improves the motor RPM.Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways.Programmable via Flipsky remote controller VX4 (remote firmware version: VX4_V1.2.1 or above).Supporting motor FOC with low working noise and smooth starting.Supporting Real-time data and fault alerts.Supporting adaptive variable PWM frequency control.Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).Supporting control types: Current, Duty CycleProtection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection.Integrated smart switch function: supports sliding poweron and automatic shutdown function; automatic shutdown time is adjustable via ESC TOOL.Supporting extra interface like front lights, rear brake lights and horn fixtures.

• Firmware: V1.4 or above (firmware update via Flipsky ESC Tool supported).select the corresponding version. The version cannot be used incorrectly. Different firmwares may cause differences in parameters; otherwise, it may easily cause damage to the ESC parameters.
• FT85BD DUAL is an ESC controller, which can be used for electric skateboards/scooters/electric bicycles/robots/DIY off-road vehicles/combat off-road vehicles, etc.
• FT85BD is an ESC controller, which can be used for Electric Skateboard / Scooter / Ebike Speed Controller / Electric Motorcycle / Robotics, etc.
• flipsky_esc_tool software and manual download pls scan the QR code in the picture.Note: USB cable black or white will be shipped randomly.
• When you just connect the controller, pay attention. If the versions are inconsistent, the page will pop up. If they are inconsistent, you need to change them to be consistent before adjusting the parameters.
• Voltage range: 14-84V (safe within 4-20S). Do not exceed the voltage range, which may cause the ESC to burn out.
• You can refer to the video. If you still don’t understand, you can contact us to send relevant videos.
• Size: L132*W81*H26.5mm(Including Alu. Case)
• Continuous Current: 100A / Single; 200A / Dual (values depend on the mounting and ambient temperature around the device!)
• Peak Current: 250A / Single; 500A / Dual.Slide Poweron & Auto shutdown: Yes；Self-resetting switch with green LED button Diameter: 16mm；Power Wire Size: 10AWG; Motor Wire Size: 12 AWG.