Gebildet Micro USB Port Dash Cam Hardwire Kit for 24H Parking Monitor/Time-Lapse Recording Converts 12V-24V to 5V/2.5A Car Dash

Wide micro USB compatibility: the 320 cm micro USB hard wiring kit is suitable for most car models (voltage between 12 and 24 V). And it is compatible with the voltage of all vehicle types powered by 12-24V, such as Dashcam, mirror camera, GPS navigation system and radar detector, etc. 24-hour parking monitoring automatically switches to parking mode. When the hardwire kit is installed, the dash cam is automatically activated. Turn on the device and start recording automatically when the vehicle is opened or started. When you turn on the parking monitoring function on the dash cam, it automatically switches to time-lapse recording mode or continuous recording mode. The micro USB hardwire kit with low voltage protection has multiple safety features with low voltage protection. It has an intelligent undervoltage protection system that monitors the voltage of the car battery in real time and automatically shuts off the power supply of your dash cam when the battery voltage drops to 11.6V or 23.6V. ACC Down Line:Automotive Positive Pole (BAT+Yellow Line), Automotive Negative Pole (GNT Black Line), Automotive ACC (ACC Red Line) When the vehicle engine is turned off, the dash cam automatically switches to parking mode. When the vehicle engine is switched on, the on-board camera switches to normal recording. The user-friendly micro USB hardwire kit consists of a hidden cable that is very easy to install and connect to the car battery. It can also be switched on and off with the ignition and continuously supplies the dash cam with power when the car is off.