Grow Light With Stand, 200W 6000K Full Spectrum Gooseneck Floor Plant Light For Indoor Plants Growing,5 Dimmable Levels & Auto On/Off Timer, Tripod Stand Adjustable 15-48 In

2024 New Design Version of Four-Head Plant Growth Light

1. This full-spectrum clip plant growing lamp contains 336 high-efficiency LEDs, suitable for all stages of plant growth. Each light contains 72  white LEDs + 12 red LEDs.

2. This light has 3 timer switch functions and 5 brightness adjustment options, suitable for various scene requirements.

3. 360° high-quality gooseneck allows the light to shine in any direction.

4. No installation required. Fix the clip base and use it with the lamp facing the plant.

Specifications:

RA: >95

336 LEDs = 288   white  LEDs(6500K) + 48 red  LEDs(640nm)

Timing: 4/8/12H

Adjustable Tripod Stand Height: 15In-48In

Five levels of brightness: 20/40/60/80/100%

Input voltage:5V*3A DC

Life time: 30,000 Hours

Material:Carbon-Steel+PVC

Certification: RoHS CE FCC

Features:

1.6000K White & Red Spectrum: A mix of Red+Warm White is best to fuel the growth of your plants.

Full Spectrum(380nm-800nm): Suitable for all plants to root and sprout. Red(660nm)  Spectrum: for blooming and fruits.

2. 4/8/12H Timer: with 3 options that is 4Hrs or 8Hrs or 12Hrs, it is based on a 24 hour cycle from the time you set the timer. For example, when keeping power ON, if you select 8 Hrs, it will turns ON for 8 hours per 24 hours.The other two timer settings are the same.

Notes:

1. It is normal for the lamp to heat up after it has been working for a period of time.

2. Do not touch the lamp with your hands when the lamp is hot.

Package:

1 x Stand

1 x Adapter(12V*3A)

1 x User Manual

1 x Grow Light with Controller

Installation Steps:

Step1: Use both hands to pull the bottom bracket to the width you want and then rotate the button counterclockwise to fix it.

Step2: Stretch the rod up/down or continue to rotate the button counterclockwise until you reach the height you want.

Step3: Place the plant light on the stand , until the plant light is fully seated and rotated clockwise until it is secure.

Step4: Connect the adapter to the power supply and press the controller to turn on/off/change modes/adjust brightness/set timing function.