Hamilton Cams 24Valve 103lb Springs + Extreme Duty Pushrods + Retainers + 24V Spring Compressor, Barring, Injector Nozzle Tool

Kit provides everything you need to do your push rods and valve springs on 24V Cummins.If you are over 750hp, the cylinder pressures acting on the valve can bend your OEM pushrods before the valve opens. This can retard cam timing and reduce valve lift These pushrods are a 3 piece design that features 12mm diameter .120″ wall, which is much thicker than the OEM 3/8 or other performance shops 7/16″ Diameter. If you are over 35 PSI (boost or drive pressure) and 3,800 RPM, we suggest going with Hamilton Cams 103lb springs with heat treat and shot peen, for better longevity in extreme applications. Hamilton Cams springs at 103 lb spring pressure and 180 lb nose pressure are better than stock which can cause valve float and reversion. INCLUDES 3 FREE TOOLS by OHIO DIESEL PARTS! 24V Valve Spring Compressor Tool: Tapered bore holes stops valve keepers from falling through the tool and reduces the chance of dropping a valve keeper in your engine. Designed to easily change valve springs, seals or retainers on Cummins 24V 5.9L and 6.7L. CNC-machined thick heavy aluminum. Quickly compress all four springs in the cylinder in one step for easy replacement. Barring Tool: Save-time turning over the engine or turning the crank to perform manual valve lash adjustment. Used to slowly rotate the engine by hand so you can line up the timing marks. Easy-to-Use: Insert tool into the flywheel housing until it engages the ring gear, attach ½” square drive racket or breaker bar to turn. Injector Nozzle Removal Tool: Simply clamp tool in vice (DO NOT OVER-TIGHTEN). Custom fit openings stops injectors from spinning while removing the nozzle preventing damage to injectors by placing them directly in a vice. 2-in1 Tool fits both 5.9L and 6.7L Cummins.Please contact customer service to ensure correct fitment on your truck: 216 408 6455**

• Must have 103lb springs if you are over 35 PSI (boost or drive pressure) and 3,800 RPM.
• If you are over 750hp, the cylinder pressures acting on the valve can bend your OEM pushrods before the valve opens. This can retard cam timing and reduce valve lift These pushrods are a 3 piece design that features 12mm diameter .120″ wall, which is much thicker than the OEM 3/8 or other performance shops 7/16″ Diameter.
• Fit 24V Cummins 5.9L/6.7L
• Hamilton Cams Part Number: 07-S-003 (Springs) and Hamilton Cams Part Number: 07-P-004 (Pushrods). Includes Hamilton Retainers.Fit 24V Cummins 5.9L/6.7L
• Includes 3 FREE TOOLS by Ohio Diesel Parts: 24V Valve Spring Compressor Tool, Engine Barring Tool, and Injector Nozzle Removal Tool