Hart & Cooley Baseboard Registers 12 06 W #043632

Made by Hart & Cooley this Model 655 steel baseboard register comes with a plate damper that easily opens and closes. The base projects out from the wall 3 3/4 inches to allow to cover holes both in the wall and the floor. The adjustable damper allows you to control how much air flow is released into the room. Vents are made of all steel with a golden sand enamel finish with fins that are 1/3" spaced and set at a 20-degree angle towards the floor. This allows for maximum warm air flow across cold floors. Be sure to measure the hole size when ordering as this are sized by the hole that they cover and will be 1 3/4" longer and 5/8" taller than the size listed. This means a 10 x 6 is for a hole size that is 10 x 6 and the overall size will be 11 3/4" x 6 5/8" with a depth of 3 3/4"

• Be sure to measure the hole size when ordering as this are sized by the hole that they cover and will be 1 3/4" longer and 5/8" taller than the size listed. This means a 10 x 6 is for a hole size that is 10 x 6 and the overall size will be 11 3/4" x 6 5/8" with a depth of 3 3/4"
• The base projection for this register is 3 3/4" from the wall allowing this register to adjust air flow for both duct work in the wall and in the floor. The back and the bottom of this vent is completely open.
• Meant to last this product boasts a sturdy all steel construction with a durable golden sand finish. Comes with an easy to control volume-control plate damper to easily adjust the amount of air released. Fins are set at a 20-degree angle with 1/3" spacing for exceptional air flow.
• This is baseboard is made for a wall duct size of 12 x 6. The overall size that this item actually is 13 3/4" x 6 5/8" x 3 3/4" projection.