High Low Voltage Clamp Current Meter Tester Online AC Current Monitor Digital Ammeter with Measuring Range AC 0.00mA to 1200A 99 Group Storage 48m

Shipping Policy : Battery Not Included During the Shipping Introduction: ☀☀H/L Voltage Clamp Current Meter connect with insulation rod, which can use for hight voltage line current measurement of the wire with insulation skin below 60KV or bare wire below 35KV, online current measurements, also with peak hold, data hold and data storage. Technical Specifications: Function: High voltage AC current measurement, low voltage AC current, leakage current measurement Clamp size : Φ48mm LCD Size : 47mm×28.5mm(with Backlight) Range : AC 0.00mA～1200A Resolution :1mA Accuracy: ±1%rdg±3dgt(23°C±5°C, 80%r or less) Data Storage : Group 99 Automatic Shutdown : Auto Shutdown in 15 minutes or so Working environment: -10°C~40°C; 80% rh below Storage environment: -10°C~60°C; 70% rh below Structure : Anti-Drip II Type Measurement method : Clamp CT, non-contact measurement, integral method Frequency : 50Hz, 60Hz Automatic Recognition Shift : Automatic shifting Peak hold: Automatically hold the test value at a high point. Press and hold the PEAK button in the test mode until the PEAK lamp is on, ie turn on the peak hold function. Data Hold : Press HOLD key to hold data in test mode, “HOLD” symbol display Data review : "MR" symbol indicates that data can be read up and down. Overflow display : Overrange overflow function: "OLA" symbol display Line voltage: Line test below 60KV (with 5 sections insulation rod operation) Measurement time : 0.5 seconds/time Voltage alarm: When the battery voltage is lower than 4.8V, the battery voltage is low and the symbol is displayed Insulation rod size: Φ32mm, 1m/section (5 sections) Insulation strength: AC100kV/rms (Section 5 between insulation rod and high voltage clamp core) Power Supply : DC 6V(7# Battery 1.5V x4) （Battery not included)

• ☀☀(1)High and low voltage clamp ammeter, suitable for high and low voltage leakage current and current measurement below 60kV, range: 0.00mA~1200A, jaw size is Φ48mm
• ☀☀(2)Resolution :1mA; Current clamp uses special alloys, magnetic shielding technology, strong anti-interference ability to ensure the accuracy and stability of the measurement. Automatic Shutdown : Auto Shutdown in 15 minutes or so
• ☀☀(3)Accuracy: ±1%rdg±3dgt(23°C±5°C, 80%r or less); LCD Size : 47mm×28.5mm(with Backlight); Measurement method : Clamp CT, non-contact measurement, integral method;
• ☀☀(4)The ammeter is composed of a high voltage detector and five high-voltage insulated rods. The insulation rod is light, with features such as moisture resistance, high temperature resistance, impact resistance, bending resistance, high insulation, and detachability.
• ☀☀(5)The instrument has functions such as peak hold, data retention, and data storage (group 99). It can also be used as a tester for high and low voltage ratios, that is to measure the high and low voltage currents of the primary and secondary circuits, respectively, and can be calculated by manual calculation. The ratio of high and low