High Tail Designs - Ultralight Rain Mitts "Ink"

Perfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.

Features:

• Extremely Water-Resistant (as close to waterproof as you can get without welding)
• Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)
• One-handed wrist cinch fastener to tighten/loosen each mitt
• Fully-Taped Seams
  
• Large glove pull on each mitt for ease of donning
  
• Shock cord wrist cinch to prevent water ingress
  
• Loops for attaching mitten hooks
  
• Unique Colorways
  
• Ultralight Construction

Care Instructions:

• Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.
• Hand wash with a gentle soap.
• Do not iron.
• Do not wring.
• Drip-dry in shade.
• Do not bleach.

Specs:

• Dimensions:
  • S/M: ~ 11.4" x 7.4"
  • L/XL: ~ 12.2" x 7.5"
• Weight:
  • S/M: 1.07oz / 30g
  • L/XL: 1.21oz / 34g

Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing.

S/M size will fit most people with a base measurement of 6.5" - 7.75".

L/XL size will fit most people with a base measurement of 7.5" - 8.25".