Hop Bong Pressure Pack for Kegmenter Fermentation Kegs | 4" Tri-Clamp

• Oxygen-Free Dry Hopping: Designed to allow dry hopping without exposing the batch to oxygen.
• Customizable with Accessories: Features undrilled ports for optional accessories such as the Temp Twister Cooling Coil and Thermowell, enhancing functionality and convenience.
• Improved WiFi Reading: The plastic lid improves KegLand RAPT Pill WiFi reading, ensuring better connectivity.
• Compatible with all Kegmenter Fermentation Kegs with 4" Tri-Clamp ferrule.

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.

This kit includes the 4" T.C. Pressure Lid to fit the tri-clamp ferule on Kegmenter Fermentation Kegs. The plastic lid also allows for improved KegLand RAPT Pill WiFi reading compared to the Kegmenter fully encasing the Pill in stainless steel.

Due to the large 4" tri-clamp diameter, it is difficult to get higher pressures without leaking. Therefore we suggest using this up to 21 psi. The included Yellow PRV for the Pressure Lid is rated to 17 psi.

The 3 Pieces of the Hop Bong Pressure Pack:

• Pressure Kit
  • ​The Pressure Kit includes two Ball Lock Caps for Gas & Liquid. The Liquid cap can be paired with the optional Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the Kegmenter.
• Tri-Clamp Pressure Lid
  • Replacing the standard lid with the Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil.
• Hop Bong
  • Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets.

Hop Pellet Capacity: 150–180g (5.2–6.3 oz)

Kit Includes:

• Kegmenter 4" T.C. Pressure Lid
• 2" Hop Bong
• 2" Butterfly Valve
• Red PRV & PCO1881 Cap Combo
• Yellow PRV
• Yellow Ball Lock Cap
• (2) Red Ball Lock Caps
• (3) 2" Tri-Clamps
• (3) 2" Silicone T.C. Gaskets

Optional Accessories:

• Floating Dip Tube (FE115A)
• Filter Attachment (KEG657)

• 7.6 Gallon (FE582)
• 13.2 Gallon (FE584)
• 15.3 Gallon (FE581)
• 1 bbl (FE585)

KegLand Part Number: KB23665

Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.