Hydrothermal Synthesis Autoclave Reactor w/PPL Lined Vessel Lined 300ml

The Hydrothermal Autoclave reactor use to carry hydrothermal reaction at high pressure and high temperature, which adopts the external heating mode, is a kind of closed container to dissolve the refractory material, The Teflon Lined Hydrothermal Synthesis Autoclave is widely used in new materials, energy, environmental engineering and other fields of scientific research and experiments, it is a small commonly used reactor used in teaching and scientific research. Hydrothermal Synthesis Reactor is a closed vessel, capable of decomposing insoluble substances. It can be used for sample dissolution pre-treatment in analysis like atomic absorption spectroscopy and plasma emission. And it can be used for synthesis of small doses. Achieving the purpose of rapid digestion of insoluble substances by taking advantage of strong acid/alkali, high temperature and pressure confined environment available. It's helpful in dissolving samples in the determination of trace elements. Capacity: Specification 80%. Ensure that the feeding is less than 80%, and for the first time must less than 30%. External material: 304 stainless steel Internal material: PPL(acid alkali resistant)Compared with PTFE lined hydrothermal synthesis autoclave reactor, PPL lined hydrothermal synthesis reactor support more higher operating temperature 280℃, which could rapidly dissolve the refractory material.

• Max Working pressure: 3MPa, Security pressure: 2MPa.
• Working temperature: 280℃ / 536℉, Security temperature:260℃ / 500℉, Heating / Cooling rate: 5°C/min，41℉/min .
• The PPL liner has no dead angle, high lubricity and non-stickiness, high temperature resistance, high pressure resistance, corrosion resistance, physical inertness and almost insoluble in all solvents. Compared with PTFE lined hydrothermal synthesis autoclave reactor, PPL lined hydrothermal synthesis reactor support more higher operating temperature 280℃, which could rapidly dissolve the refractory material.
• The stainless steel body is integrally processed and formed, the 304 stainless steel wall is thickened, and the refined thread is matched with the lengthened tightening rod to create a high-pressure air-tight reaction environment to ensure safe experiments. Material: 304 stainless steel reactor & PPL lining.
• The kettle lid body and seal are made of durable and reliable cable sealing structure, and the sealing effect is stable and leak-free for a long time.