INSL-X Lead Block, Lead Encapsulating Paint, Eggshell, White, 1 Gallon

Lead Block is a water-based elastomeric acrylic lead encapsulating paint, with excellent adhesion, elongation, and tensile strength characteristics. When applied to surfaces bearing lead-containing paint, this product will seal in the lead paint with a thick coating. This water-based, elastomeric coating, is formulated to encapsulate lead-based paints and forms a dense, high-solids barrier that blocks and seals to prevent the migration of lead contaminants from reaching the surface. It contains Bitrex, a bitter tasting, anti-ingest ant, which deters children from oral contact when painting over lead paint. Lead Block paint may be applied to interior walls, trim and ceilings, or properly prepared drywall, plaster, wood, masonry or metal surfaces as an alternative to expensive lead paint remediation. On exterior surfaces, this product may be applied to vertical surfaces, including properly prepared masonry, stucco, wood, or metal substrates. Before using this product, read and understand the federal, state and local regulations regarding the use of lead encapsulating coatings. Before using, read the Lead Block product data sheet. It contains the full and complete surface preparation, priming, application instructions and the warnings and environmental considerations. Available at: www. insl-x

• Seals in and blocks lead contained in old lead-based paints on previously painted surfaces.
• Can be used as a lead paint encapsulation primer or top coat.
• Easy paint application with brush, roller, or spray.
• Low VOC with an attractive eggshell finish.
• Can be top-coated using most water-based architectural coatings.
• Before painting, review the INSL-X Lead Block label for proper preparation and application tips.