J.V. Converting JVCC Double-Sided PVC Tape, 4 in. (96mm Actual) x 36 yds. (Clear)

JVCC DC-4420LB Double Coated PVC Tape is a PVC film coated on both sides with a water based acrylic adhesive. On a gold siliconized paper liner. The adhesive system of this two-sided tape is very aggressive and will bond to nearly all materials (even on difficult surfaces like foams, PE and PP films). Has excellent temperature, UV, aging, and water vapor resistance. Used for bonding rubber, plastic, metal, and wood substrates and for permanent mounting of nameplates, posters and mats. Also for hemming vinyl banners and decorative trim on appliances and furniture. Has a one hour dwell before adhesion reaches maximum. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 96mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores.

• JVCC DC-4420LB Double-Sided PVC Tape is a PVC film coated on both sides with a water-based acrylic adhesive. The tape comes on a gold siliconized paper liner. The adhesive system on this double-sided (AKA double-coated) tape is very aggressive and will bond to nearly all materials (even on difficult surfaces like foams, PE and PP films).
• It has excellent temperature, UV, aging, and water vapor resistance. Used for bonding rubber, plastic, metal, and wood substrates and for permanent mounting of nameplates, posters, and mats.
• Also for hemming vinyl banners and decorative trim on appliances and furniture. Has a one hour dwell before adhesion reaches maximum adhesiveness.
• Carrier/Backing: polyvinyl chloride (PVC) film. Adhesive: water-based acrylic. Release Liner: gold siliconized paper. Thickness: 10.7 mils (carrier, adhesive, liner) 7.87 mils (carrier, adhesive) 3.2 mils (carrier) 2.9 mils (liner).
• Adhesion: 157 ounces per inch (to stainless steel test panel). Service/Operating Temperature: -40F to 176F. Shear Resistance: 14 pounds per square inch. Core: 3-inch diameter neutral.