Malco C5A2 Impact Power Assisted Crimper & TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

Malco C5A2 Impact Power Assisted CrimperThe Malco turbo crimper impact is a simple, compact accessory that works exclusively with the power assistance of impact Driver technology to safely and efficiently crimp 30 to 24 gauge (0.41 to O.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove pipe. The turbo crimper impact does not require set-up or adjustment. Just chuck the 1/4 inch power groove drive shaft to your cordless or corded (min.12 volt DC / max. 7 amp AC) impact Driver to immediately begin crimping multiple sizes, types and thickness of pipe and duct, including spiral duct, fast and easy. With the pipe or duct Seam in closed position, start the crimp to one side of the Seam by gently tugging on the Driver trigger and angling the turbo crimper impact onto the metal edge. Walk the Crimper around the pipe circumference in a controlled manner and then angle the Crimper off the metal as the Crimper approaches the other side of the Seam. The turbo crimper impact is five times faster than a manual crimping tool based on Actual Field trials! it is comfortable for any operator to maneuver and, lefties take Note, it works with the impact Driver in forward or reverse. The handy little turbo crimper impact is a Must-Have accessory for every HVAC installer and easily stores in a ready tool pouch or bag when not in use.Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting AttachmentInserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It's that easy to convert your power drill to a power shear! Cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20 gauge (1.02 mm) galvanized steel. For premium performance without the premium price of a dedicated power shear, it's is an easy addition to every tool bag.

• Product 1: Quickly makes your impact driver a power crimper.
• Product 1: Crimps 30-24 ga. (0.41-0.71 mm) round metal duct.
• Product 1: No set-up or adjustment.
• Product 1: Compact, easy to maneuver and balance.
• Product 2: Turns your power drill into a power shear
• Product 2: Inserts into chuck of an A/C or cordless drill
• Product 2: 20 gauge capacity in galvanized steel
• Product 2: Navigates tight patterns and square cuts