Manual Quilling Fringe Machine for Tassels Flowers Roll Making Paper Cutting DIY Tool, Tool for Cutting Sheer Paper Fringes

-- 01. Loosen the screw and pull the baffle outward -- 02. Comb the paper strips with your hands so the head is slightly tilted up (make sure the paper head is flat and free of glue) -- 03. Pass the quilted paper strip under the paper guide column and feed it directly to the platen (If the paper is not easy to feed, you can use tweezers or small tools to help the process). -- 04. Press down the paper shaft with your thumb and middle finger and continue feeding the paper strip to the right side of the roller -- 05. Press the baffle inward against the quilling paper and tighten the screws slightly (note that the baffle can only lean slightly against the quilling paper, not too tight). -- 06. Start cutting (when cutting, you can lay the machine flat on the table to cut, or hold it in your hand to cut)

• -- Safe and Safe: Scissor-type cutting knife can reduce wear between blades, no exposed blades, safer to use.
• -- Delicate and compact ： Size: 95 x 75 x 80 mm; Weight: 0.3kg
• -- Adjustable range：button screws that can adjust the length and width of the tassel. Cuttable Tassel Size: 0.25mm-2.2mm, Cuttable Strip Size: 4mm-14mm
• -- Unique design: bearing structure, smooth cutting, can keep the paper smooth without curling to the greatest extent.
• -- Application: Support the production of various filamentous flowers, enjoy the fun of DIY with your family.