Marco UP3/OIL Self-Priming Oil Pump with Bronze Gears 5.5 L/min 2 Bar 24 V Transfer Pump Boat Pump Diesel Pump Ship Pump Heating Oil Pump Supply Pump Yacht Pump

Self-priming small electric pumps with bronze gears, especially suitable for transferring diesel, oil or viscous liquids. Nickel-plated brass housing, stainless steel spindle. Especially suitable for the extraction of lubricating oil from the oil pan of the engines. The pump is also designed for diesel, oil with low viscosity up to 350 cst. The pump can be used in many areas, such as Ships and boats, trailers and motor homes, construction machinery, agriculture, industry, households, etc. Professional commitment and continuous growth are the basis of the experience on Marco S.P.A. based. Based. Almost 30 years. Founded in 1970 by Giovanni Marco Franceschini and is now the world leader in the quality of small electric pumps at the highest level. Legendary reliability makes Marco products demand where there is no risk of price compromises: sea, science, manufacturing, road transport. *Made in Italy* - not cheap imports from the Far East. Technical data: Voltage: 24V Power consumption: 3 A Fuse: 4A Cable mm²: 1.5 (up to 2 m) Self-priming: 1.0 m Pressure: 2 bar Flow rate: 5.5 l/min (Oil SAE 30 at 25 °C) Hose: 13 mm Drills: 3/8" BSPP Motor power: 90 W Wheel material: bronze Weight: 1.4 kg IP67Ambient conditions: temperature: min-10°C 14°F-max.60°C 140°F RELIVE MOISTURE: max. 90% The pump can be operated in a continuous cycle under the following conditions: Presses that do not exceed 50% of the maximum pressure specified in the technical documentation Motor temperature below 60/70°C - 140/158°F It is possible to work with higher press/amp current when on/off cycles are used. This will allow the engine to cool to the specified temperatures.