OEM Shelix cutterhead for Dewalt planer DW735

The ORIGINAL SHEar & heLIX spiral cutter non grind design! Made in the USA by Byrd Tool Corp., these indexable carbide insert cutterheads provide a shear, staggered cut instead of a single, straight knife cut. Not only does this provide a superior finish on your work piece, it is a lot easier on your dust collection system because the configuration of the inserts breaks up the chips. Another benefit to the indexed insert design is ease of maintenance. Dull or damaged insert knives are individually replaced, a much more cost effective option than having to replace expensive knives the full length of your planer head. Each cutterhead comes with 5 extra inserts and a torque driver to aid insert replacement. The Dewalt DW735 replacement cutterhead now comes in two sizes. The original was sized slightly smaller (.0078 inches) than the OEM cutterhead in order to fit through the hole in the chassis with the inserts still mounted on the cutterhead. This OEM cutter is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts prior to install, and then replace them once the cutterhead is in place.

• This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
• Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
• Helical insert knife configuration breaks up chips, making dust collection easier.
• Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade; comes with 5 replacement inserts.
• Made in the USA!