Original Bamboo P2S Feed Buffer, Filament Buffer Replacement for Bambu Lab P2S 3D Printer Accessories,Reduces Tension Fluctuations During The Feeding Process, Ensures Smooth Filament Feeding

Original Bamboo P2S Feed Buffer, Filament Buffer Replacement for Bambu Lab P2S 3D Printer Accessories,Reduce resistance during the feeding process to improve the smooth feeding of filaments.

• P2S dedicated accessory: This filament buffer unit is designed specifically for Bambu Lab P2S printers, allowing for quick replacement and easy restoration of optimal feeding performance.
• Quick Disassembly and Installation: First, remove the original buffer. Unplug the cable lock, use an H2.0 Allen wrench to remove the two screws, and then disconnect the PTFE tube to remove the existing buffer; reverse the process to install the new buffer.
• Function Verification: After installation, start the AMS loading operation to confirm success; if the loading completes normally, the replacement is successful. Otherwise, check that the buffer's connecting cable and PTFE tube are correctly connected, and then try again.
• The product includes: New dampers suitable for Bambu Lab P2S: H2.0 hex wrench
• Friendly reminder: Even with a good filament buffer, the correct PTFE tube length is important. We recommend making it as short as possible without excessive bending to reduce the resistance of the filament sliding inside the PTFE tube.