PFERD Tapered Type Abrasive Spiral Band, Ceramic Oxide Grain CO-Cool, 1-1/8 to 7/8" Diameter x 1-3/16" Length, 120 Grit (Pack of 100) - Part 41395

PFERD abrasive band for aggressive grinding with maximum stock removal on hard and tough materials which do not conduct heat well. Active grinding additives in the coating significantly improve stock removal, prevent clogging and result in cooler grinding. Abrasive spiral band can be mounted and removed by turning them slightly to the right. Abrasive spiral band are easier to mount when the rubber drum holder is mounted on the tool drive. The secure attachment of the abrasive spiral band is only guaranteed if the minimum rotational speed is observed. Advantages: Because of slots, the holder expands during use, guaranteeing that the abrasive spiral band is firmly clamped in place. Outstanding service life due to special manufacturing process – even under the most demanding operating conditions. Particularly high stock removal and high aggressiveness of the abrasive. Removing weld seams in steel construction. Fine grinding work in equipment, tank and vessel construction. Post-processing for assembly and repair work. Machining edges and contours in aircraft engine construction. Specification: Diameter (inches): 1-1/8 to 7/8; length (inches): 1-3/16; Type: Tapered type; Grit: 120; Suitable holder: EDP 42007; Recom. Speed RPM: 10,000 - 15,900; Abrasive: Ceramic oxide grain CO-COOL.

• For aggressive grinding with maximum stock removal on hard and tough materials
• Available in tapered drum shape
• Built with ceramic oxide grain co-cool abrasive material
• Abrasive spiral band can be mounted and removed by turning them slightly to the right
• Particularly high stock removal and high aggressiveness of the abrasive