Radium - Fuel Cell Foam

Radium Engineering fuel cell foam Mandated by the FiA, fuel cell foam is used both as an explosion suppressant as well as baffling. This reticulated foam is manufactured from polyurethane and meets MIL-DTL-83054C Type-II. At 15 pores per inch (nominal), it displaces only 0.07 gallons (or 9oz) of fuel per foam piece.After every race season, inspect the condition of fuel cell foam and replace at least every 3 seasons. While it was designed for longevity in hydrocarbon fuels, Radium has also performed thorough testing with high content alcohol fuels (ethanol and methanol). These test have shown no signs of foam deterioration. However, it is advised to do more frequent inspections as alcohol could potentially shorten the foam life span. NOTE: All Radium Engineering fuel cells come preassembled with this exact foam.BENEFITS-Limits fuel aeration for starvation protection insuring constant delivery to the pickup.-Keeps weight transfer to a minimum during cornering, acceleration, and braking.-Displaces fuel vapors, reducing explosion potential.Radium Fuel Cell: 6 Gallon R06AQuantity Required: 2Modifications: Cut each end 4.95" (126mm) shorterRadium Fuel Cell: 10 Gallon R10AQuantity Required: 2Modifications: NoneRadium Fuel Cell: 10.5 Gallon R11AQuantity Required: 2Modifications: Cut each piece in 3 sectionsRadium Fuel Cell: 14 Gallon R14AQuantity Required: 3Modifications: Cut 1 piece in half longwaysRadium Fuel Cell: 22 Gallon R22AQuantity Required: 5Modifications: Cut 1 piece in half longways