Rappel Ring Small - Red

TECHNICAL SPECS

Material: Aircraft-Grade Aluminum Alloy, Anodised, Hot Forged
Breaking Strength: 25kN / 5600lb
Inner Diameter: 28mm / 1.1inch
Outer Diameter: 51mm / 2.0inch
Thickness: 11.5mm / 0.45inch
Net weight: 36g / 1.27Oz per piece

FEATURES

What a simple aluminum ring can do? Right Beyond Your Imagination!
You first find it work as a simple device in bail-out when other belay or rappel device is not available. Then, it appears in the climber's harness bridge to attach climber to working system without damaging lanyards. When you try to set up an anchor point, it's there for you.

• A connecting point for attachments from all direction in rigging systems.
• Small + large ring, a smart friction saver device to protect your rope from abrasion due to friction.
• More...

Never thought it goes so far as to work in pairs to hang hammocks, keeping devoting in areas other than climbing. Man creates tool and benefits!

• Light: weighs less than 1.3 Oz per piece due to aircraft-grade aluminum, easy to carry
• Strong：25kN / 5600lb breaking strength, equal to or larger than most carabiners
• Seamless Forging: solid construction, safe from every angle
• 360°All-Round: Beautifully round shape gives ring capability to withstand forces from all direction. You will no longer worry about improper loading direction.
• SMOOTH ROPE PULL: thickness up to 11.5mm / 0.45inch provides smooth rope / webbing pulling, avoiding stuck rope.

Work in single unit: 360° All-Round Connecting Point
Reduce friction to protect textile gear: webbing and rope

When a webbing or rope slides over another textile gear or gear with sharp edges, it generates plenty of friction which will largely cut down the service life of rope/webbing.

Just attach the rappel ring to the "static" part, which allows rope/webbing to slide over a 360° All-Round rappel ring to reduce unnecessary friction and protect textile gears. Nice and easy, smooth than ever~~~

Avoid improper loading direction

A carabiner finds itself in a dilemma when it needs to connect itself to other two loadings from east and west sides. If directly connecting, cross loading happens. What to do?

Rappel ring is here to solve the problem. Attach the carabiner to the rappel ring which connects itself to these two loadings from opposite directions. Simple and Powerful!

Work in A PAIR: Easiest SRL (Structural Ridgeline) Tension Controller

With a pair of rappel rings, hammock is able to be adjusted while hanging. Attach the hammock rigging cord to rings with Garda Hitch. Garda hitch let rope move in one direction, but not in the other.

1. Weight of hammock won't cause the cord to move or add more slack.
2. However, when you try to tension the hammock, just pull the other side (free side) of the hitch. Cord moves smoothly.

Easy and Efficient!