Rear Bar Pin Flag Nut Compatible with 1984-2001 Jeep Cherokee XJ 4WD 2WD - Fix Rear Upper Shock Mount

Fits： 1984-2001 Cherokee XJ 4WD/2WD KIT CONTENTS (2x) Rear Bar Pin Flag Nuts (4x) 5/16” X 1” Bolts (4x) 5/16” Flat Washers WHICH NEEDED 13mm wrench 5/8” Socket / Wrench Air Hammer INSTALLATION INSTRUCTIONS SETP 1- After the shock absorber has been removed from the vehicle. STEP 2- Using an air hammer, knock out factory welded in nuts. STEP 3- Insert flag nut through access hole in the unibody. STEP 4- Align the flag nut with the factory holes. STEP 5- Install shock using supplied 5/16” x 1” bolts and washers. STEP 6- Tighten shock bolts using a 5/8” socket or wrench.

• Function：Bar pin flag nuts fix your broken rear upper shock mount bolts,Direct replacement
• Contents：(x2)Bar pin flag nuts, (x4)bolts, and (x4) washers instruction
• Fits：1984-2001 Cherokee XJ 4WD/2WD
• Installation：To install, simply knock out the factory nuts welded in the unibody, slide Bar Pin Flag Nut into the unibody hole, and use the flag nut handle to easily line up your new mounting point within the unibody recess.
• Description：Made using the finest materials for lasting durability