Rongsi Oil Extractor Pump,12V 100W, Engine Oil Pump for Oil Change, Fluid Transfer Pump for Engine Oil, Gear Oil, Transmission Fluid Change, Self-Priming Electric Fluid Transfer Pump for Car, Mower

<p>1.Remove RedCapsRemove the red caps on both sides and secure the screws&nbsp;</p> <p>2.Secure the PipeAttach the pipe to the pump using a clamp 3.ConnectCar BatteryRed clamp: Connect to positive terminal Black clamp: Connect to negative termind&nbsp;</p> <p>4.Insert Inlet andOutlet PipesDiace the inlet nine into the oll tonb cnd the outlet pipe into the waste oil drum&nbsp;</p> <p>5.Power On thePumpTurn on the pump to begin operation</p>

• ‌HEAVY-DUTY DESIGN: The upgraded 100W pure copper motor delivers fast and efficient oil extraction, our oil pump extractor is corrosion-resistant, wear-resistant, and designed for long-lasting performance. It’s a great choice for frequent oil changes
• QUIET AND EFFICIENT: The low-noise oil transfer pump 12v allows for easy oil extraction. Preheating the engine to 104°F to 140°F in low temperatures enables a quick and easy oil change. 12V DC, 100W power, flow rate of 1-4 L/min (50-194°F). Designed for efficient oil extraction with a maximum continuous operation of 30 minutes
• MULTI-FUNCTIONAL OIL PUMP: The unique oil extractor pump for oil change is suitable for motorcycles, trucks, tractors, marine engines, lawn mowers, pressure washers, snow blowers and other outdoor power equipment. It can extract engine oil, transmission fluid, coolant, and diesel
• USER-RIENDLY OPERATION: This electric oil extractor pump is easy to store and transport, with simple installation. Just preheat, attach the hoses, connect the battery clamps, and you're ready to start extracting.Engineered with leak-proof clips to prevent oil leaks during operation, offering a reliable and safe oil change process
• PRECAUTIONS: Control the flow rate by adjusting the voltage. Before extracting viscous oil, preheat the engine oil pump to 40°C - 60°C (104°F - 140°F). Do not operate the oil extractor pump continuously for more than 15 minutes; allow it to cool for 10 minutes between operations to prevent overheating. Regularly check the hoses and connectors for blockages or damage, as clogs can limit the flow rate and cause overheating