RV Power Cord Twist Lock Plug Heavy Duty 50AMP NEMA 50R Locking Connector for Camping Car, PVC ABS Construction, for RVs, Trailers, Boats

1. [HIGH CURRENT RATING] Equipped with a 50AMP NEMA 50R plug for strong power supply. 2. [PREMIUM MATERIAL] Made of heavy-duty ABS and PVC for durability and weather resistance. 3. [EASY INSTALLATION] Color-coded terminals for straightforward setup. 4. [VERSATILE APPLICATIONS] Ideal for RVs, camping cars, trailers, and more. 5. [ DESIGN] Features a locking cover for protection against water and dust. Specification: Item Type: RV Power Cord Twist Lock Plug with Boot Locking Cover Material: PVC, brass Rated Current: 50A Plug Type: NEMA 50R Plug Size: Approx. 13x5.1x5.9cm/5.1x2.0x2.3in Cover Size: Approx. 13.2x8.2cm/5.2x3.2in Wiring Specifications 1. Strip 3/4 inch of insulation from the wire end, ensuring the wire core is clean, strip the wire again. 2. Wire color coding: 3 Wire system: Black: hot wire, white: neutral wire, green: equipment ground wire 4 Wire system: Black: hot wire, red: hot wire, white: neutral wire, green: equipment ground wire 3. Insert the wires into the terminal holes, tighten the terminal screws to 20 inch pounds torque, ensuring no insulation is left behind. 4. Wiring: Thread the internal wiring through the box opening using at least 10 AWG/3c wire, do not use smaller wire to prevent overheating and potential electrical fires. 5. Strip and connect: Strip 3/5 inch from the wire ends, ensure the wires are clean, insert them into the openings behind the inlet following color coding, and tighten the terminal screws. 6. Organizing and securing: Route the wires through the backplate and strain relief device, slide the backplate behind the inlet, and tighten the strain relief screw. Position the inlet over the enclosure opening, align the mounting holes, and secure the inlet to the enclosure using screws. Adjustment Steps: Power off: Cut off power at the circuit breaker. Remove old inlet: Detach the old inlet from the housing and disconnect the internal wiring. How to Use: Installation Steps 1. Identify Position: Choose a suitable location on the housing, avoiding any pipes or other obstacles, and ensure all power tools are properly grounded. 2. Match and Cut: Use a hole saw to match and cut a 2-7/8 inch diameter hole in the housing. 3. Place Inlet: Insert the inlet into the opening and use it as a template to match the mounting hole positions, then drill the mounting holes using a 1/8 inch drill bit. 4. Remove Rear Barrier: Remove the rear barrier by unscrewing the 2 screws at the front of the inlet. PackageList: 1 x RV Power Cord Twist Lock Plug 1 x Protective Cover 1 x Instruction Manual Note: Installation Precautions Electrical hazards: There is a of electric shock and fire during installation. Ensure connectors and cables are not connected to the power supply. Professional advice: If unsure how to install, consult a qualified electrician. Applicable materials: For use with copper wires only. Cable specifications: Use 6AWG/4C or 6AWG/3C and 8AWG/1C cable specifications. Required tools (not included): pencil, electric drill, 2-1/2 inch hole saw, 1/8 inch drill bit, flathead , wire stripper/cutter, 8 stainless steel flathead screws

• [HIGH CURRENT RATING] Equipped with a 50AMP NEMA 50R plug for strong power supply.
• [PREMIUM MATERIAL] Made of heavy-duty ABS and PVC for durability and weather resistance.
• [EASY INSTALLATION] Color-coded terminals for straightforward setup.
• [VERSATILE APPLICATIONS] Ideal for RVs, camping cars, trailers, and more.
• [ DESIGN] Features a locking cover for protection against water and dust.