Spax T-Star Plus, Plate Head Wood Screw, Partially Threaded, 4Cut mm A3J, 251010801205

SPAX - Safety, quality and reliability since 1967. The branded product in the characteristic green packaging – produced at home in Germany and exported from there to all over the world: clever minds in Ennepetal constantly develop ideas, expand the product range and establish the highest quality for DIY enthusiasts, professional processors, planners and architects all over the world. - This product is suitable for use: for attaching rafters or roof insulation systems - Higher head pulling forces due to plate head. Optimum power transmission and clean fit even when processing overhead with SPAX bit T-Star plus T40 with guide pins. Effortless work and longer battery life: no pre-drilling (depending on wood). Easy penetration, reduction of the splitting effect thanks to 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax wave profile - Made in Germany. Approved for building inspection: European Technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114) - Box contents: 1 SPAX box, 50 pieces wood screws, T-Star plus, plate head, partial thread, 4CUT, galvanised, yellow passivated, thread diameter (Ød1) = 8 mm x total length (Ls) = 120 mm. Full thread length (LgV) = 80 mm, head diameter (Ødk): 20 mm, bit not included

• Usage: for fixing rafters or roof insulation. Exclusive WIROX coating from SPAX
• Better traction during screwing thanks to washer head. Optimal power transmission and better fit on SPAX T-STAR plus T40 with guide pin, even with overhead work
• Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers
• Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114)
• Contents: 1 SPAX box, 50 wood screws, T-STAR plus, Washer head, Full thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 8mm x Total Length (Ls) = 120mm, Full Thread Length (LgV) = 80mm, Head diameter (脴dk) = 20mm, Bit not included