Speedokote Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8

This sale is for a quart of fast dry gray 2.1 lbs/gallon voc epoxy primer (SMR-260G-Q) and an 8oz can of epoxy catalyst (SMR-261-8). Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8 Epoxy primer & sealer with great color & gloss holdout. SURFACE PREPARATIONS Clean surface with a Wax and Grease Remover. Sand metals or old paint with 180 grit and re-clean. SPRAY GUN SETUP HVLP Gun: Fluid Tip 1.3-1.6 mm, Spray Pressure 8-10 psi APPLICATION Epoxy Primer should be applied in medium wet coats, with a 10-minute flash period between each (at 70 °F). One to two coats is enough to achieve the desired dry film thickness. Epoxy primer may be topcoated after approximately 30 minutes per coat, or up to about 3 days. After three days, the primer MUST be sanded prior to topcoat application.

• Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray
• Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075)
• Excellent adhesion and corrosion resistance
• Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes
• Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075)