STEPPERONLINE 1 Axis CNC Kit 3Nm(425oz.in) Nema 23 Stepper Motor+ 1.0-4.2A 20-50VDC Stepper Driver DM542T+ Switching Power Supply LRS-150-36

Motor Specification *Manufacturer Part Number: 23HS45-4204S *Motor Type: Bipolar Stepper *Step Angle: 1.8deg *Holding Torque: 3.0Nm(425oz.in) *Rated Current/phase: 4.2A *Phase Resistance: 0.9ohms *Inductance: 3.8mH±20%(1KHz) *Frame Size: 57 x 57mm *Body Length: 113mm *Shaft Diameter: Φ10mm *Shaft Length: 24mm *D-cut Length: 20mm *Number of Leads: 4 *Lead Length: 400mm Driver Specification *Pulse Width: 2.5μS *Isolation Resistance: 500MΩ *Pulse Input Frequency: 0~200kHz *Output Peak Current: 1.0~4.5A(3.2RMS) *Input Voltage: +18~50VDC(Typical 36VDC) *Logic Signal Current: 7~16mA(Typical 10mA) *Support PUL/DIR mode *Automatic idle-current reduction *Over-voltage and over-current protections *Soft-start with no “jump” when powered on *5V/24V logic voltage selector, default setting 24V *Anti-Resonance provides optimal torque and nulls mid-range instability *Pulse input frequency up to 200KHz, TTL compatible and optically isolated input *Suitable for 2-phase and 4-phase motors, works well as nema 17 driver, nema 23 driver *8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.50A *Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors *Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement *16 selectable microstep resolutions including 200, 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 Power Specification *36V DC 4.3A output *AC input voltage range: 85 ~ 132VAC *Rated power: 154.8W *AC input range selectable by switch *Withstand 300VAC surge input for 5 second *No load power consumption <0.5W *Protections: Short circuit / Overload / Over voltage / Over temperature Connection A+: Black, A-: Green, B+: Red, B-: Blue

• This CNC kit included:
• 1 x DM542T: Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor
• 1 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC
• 1 x LRS-150-36: MEANWELL 154.8W 36VDC 4.3A 115/230VAC Enclosed Switching Power Supply