Stronghero3D PLA 3D Printer Filament 1.75mm Vertigo Galaxy Rainbow Multicolors Accuracy +/-0.05mm Net Weight 1kg(2.2Lbs) for Ender3 Prusa

★★★★★ 4.5 94 Bewertungen

€8.30
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.castellidiario.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€8.30
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 23.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.castellidiario.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 241048822 Erscheinungsdatum 2026/07/17 Listenpreis €8.30 Modellnummer 241048822
Kategorie

Brand: Stronghero3D

Color: Pla Rainbow Galaxy Starly

Features:

  • PLA vertigo galaxy multicolors,pla multicolors filament 1.75mm.PLA filament 1.75mm,the glitter produced by the unique surface suspension technology has a strong flickering effect and evenly covers surface. The glitter is only as small as 0.050mm, but the commonly used particle size on the market is bigger as 0.1-0.2mm, our filament with very small chance to block the nozzle.
  • PLA raw material is imported from European, no recycled material or reworks material, stable diameter control and no jam.PLA filament 1.75mm,net weight 1kg.Vacuum sealed and includes silica desiccant.
  • It is suggested that the nozzle should be used at a temperature of 195-215 ℃. If hairy occur when printing, adjusted gradually by 5-10 ℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃.
  • For better printing smoothness and success, nozzle 0.4mm or bigger,layer height 0.2mm or bigger,printing speed lower than 150mm/s,using cheap and easily replaceable nozzles hot end is necessary if Bamboo’s 3D printer.
  • To prevent filament tangling, make sure to secure the filament end either within the spool's designated hole or elsewhere after 3D printing. In case the filament end accidentally slips past during extrusion, rewind the filament to check for any potential tangles.
  • In order to reduce possible warping of the first layer, we recommend preheating the hot bed temperature to 55-65 degrees, reducing the printing speed of the first layer to 25mm/s, and setting the line width to 0.6mm or the flow rate to 150%, excessive fan cooling in cooler weather will worsen edge warping.

EAN: 0743450938324

Binding: Office Product

Part Number: PLA_RM_GLX

model number: PLA_RM_GLX


Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.5 von 5
★★★★★
94 Bewertungen | 39 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
83% (78)
4 Sterne
4% (4)
3 Sterne
2% (2)
2 Sterne
1% (1)
1 Stern
10% (9)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.