SW30-4040 RO Membrane by FilmTec

★★★★★ 4.8 34 Bewertungen

€36.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.castellidiario.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€36.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 20.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.castellidiario.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 210999480 Erscheinungsdatum 2026/04/04 Listenpreis €36.00 Modellnummer 210999480
Kategorie

The DOW FILMTEC SW30-4040 reverse osmosis membrane boasts one of the highest flow rates, catering to the water needs of both sea-based and land-based watermakers. It can operate at lower pressures, reducing pump size, operational costs, and overall expenses. These membranes are frequently used in on-board watermakers to produce drinking water from brackish or ocean water for boats, yachts, and cruise ships. For detailed specifications, download the data sheet: FilmTec_SW30_product_datasheet_pdf. The SW30-4040 model features a flow rate of 1,900 gpd (7.4 m/d), an applied pressure of 800 psig (55 bar), and a stabilized salt rejection rate of 99.4%. It has a hard shell fiberglass exterior, an active membrane surface area of 80 sq. ft., and a polyamide thin-film composite membrane type. The permeate flow and salt rejection are based on a 32,000 ppm NaCl feed stream at 77°F, 8% recovery, and 800 psig. The operating limits include a maximum operating temperature of 113°F (45°C), a maximum operating pressure of 1,000 psig (69 bar), and a maximum pressure drop of 15 psig (1 bar). It can handle a maximum feed flow rate of 6 gpm (1.4m/h) and has a pH range of 2-11 for continuous operation, with a short-term cleaning pH range of 1-13. It has a maximum feed silt density index of SDI 5 and a free chlorine tolerance. Please note that the maximum temperature for continuous operation above pH 10 is 95°F, and oxidation damage is not covered under warranty. For further assistance, visit our FAQ page or contact us.

  • High Flow Rate & Cost-Efficient RO Membrane: Ideal for sea and land watermakers, this FilmTec SW30-4040 membrane offers one of the highest flow rates and can operate at lower pressures to reduce pump size and expenses
  • Download Specifications: Get detailed information in the FilmTec SW30 product datasheet
  • Permeate Flow & Salt Rejection: Based on 32,000 ppm NaCl feed stream, 77°F, 8% recovery, 800 psig
  • Operating Temperature & Chemical Exposure: Maintain continuous operation below 95°F at pH above 10. Avoid free chlorine and other oxidizing agents to prevent membrane failure
  • Need Assistance? Visit our FAQ or contact us for further information
Brand Name FilmTec
Material Type Resin
Product Benefits Removes salt and impurities from seawater or brackish water, providing a high flow rate of clean water while being energy-efficient.

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.8 von 5
★★★★★
34 Bewertungen | 14 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
87% (30)
4 Sterne
2% (1)
3 Sterne
1% (0)
2 Sterne
0% (0)
1 Stern
10% (3)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.