Tap & Reamer Self Aligner Holder for Perfect Alignment While Tapping, Reaming on Flat & Round Workpiece

★★★★★ 4.7 128 Bewertungen

€17.20
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.castellidiario.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€17.20
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 20.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.castellidiario.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 219301006 Erscheinungsdatum 2026/05/03 Listenpreis €17.20 Modellnummer 219301006
Kategorie

Hold tap and reamer true, preventing breakage. Hardened and replaceable jaws.Holds tool true-perfect alignment to reduce tap breakage eliminated by a large extent Works on flat and curved surfaces. The tap wrench, which will handle from 2.5mm to 12 mm square, locates in a sleeve with a 40mm diameter base machined square to the bore to ensure perfect alignment. There is a triangular groove cut across the base for accurate tapping into circular bars or tubes. Two apertures in the side of the sleeve allow you to check the progress of the tap. Set consists of tapping guide, tap holder and jaw A for capacity 1/16" to 1/4” & Jaw B for capacity 1/4” – 1/2” / M6 – M12 Tap

  • Hold tap and reamer true, preventing breakage. Hardened and replaceable jaws.Holds tool true-perfect alignment to reduce tap breakage eliminated by a large extent Works on flat and curved surfaces.
  • The tap wrench, which will handle from 2.5mm to 12 mm square, locates in a sleeve with a 40mm diameter base machined square to the bore to ensure perfect alignment.
  • There is a triangular groove cut across the base for accurate tapping into circular bars or tubes. Two apertures in the side of the sleeve allow you to check the progress of the tap.
  • Set consists of tapping guide, tap holder and jaw A for capacity 1/16" to 1/4” & Jaw B for capacity 1/4” – 1/2” / M6 – M12 Tap
Item Weight 1.29 pounds
Manufacturer Buyohlic
Item model number 60-SA-101
Package Dimensions 5 x 5 x 1 inches

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.7 von 5
★★★★★
128 Bewertungen | 52 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
86% (110)
4 Sterne
2% (3)
3 Sterne
1% (1)
2 Sterne
1% (1)
1 Stern
10% (13)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.