Toneshaper Guitar Wiring Kit, For Fender Telecaster, Sss2 (Nashville Wiring)

Stick A Strat Middle Pickup In A Tele And You Have A Nashville Tele. This Wiring Was Made Popular By Nashville Session Players In The 1990S. A Typical Configuration Would Be To Install A Duncan Hot Stack In The Middle, And To Wire Its Top Coil To A Dedicated Volume Control That Was Tucked In Between The Teless Normal Controls. Brent Masons Tele Has A Similar Configuration. The Idea Behind All Of This, Of Course, Was To Add Tonal Flexibility By Adding Some Strat Coolness To A Teles Coolness. Fender Ties The Three Pickups To A 5-Way Switch - Rather Than The Standard 3-Way - And Does Not Use A Third Knob. While This Reduces The Tonal Flexibility Somewhat, It Cleans Up The Guitar By Getting Rid Of The Third Knob, Which Is A Tight Fit On A Teles Control Plate. This Produces Most Of The Commonly-Asked-For Tonal Options, And Is The Most Popular 3-Pickup Tele Wiring. Position 5: Neck Pickup Position 4: Neck + Middle Pickups (Parallel) Position 3: Bridge + Neck Pickups (Parallel) Position 2: Bridge + Middle Pickups (Parallel) Position 1: Bridge Pickup (1) Capacitor, .022F Orange Drop (1) Jack, Switchcraft, 1/4'' Mono, Long Bushing (2) Pot, Cts 250K Audio, Low Torque (.250'' Bushing Length) (1) Screw For Shielding Ground Lug (1) Shielding Ground Lug (1) Switch, Oak-Grigsby, 5-Way, Single Wafer 2-Pole (1) Treble Bleed Kit For Single-Coils (2') Wire, 22 Awg Cotton Push Back W/ Tinned Overcoat, Black (2') Wire, 22 Awg Cotton Push Back W/ Tinned Overcoat, White (2') Wire, 22 Awg Stranded Silver-Plated Copper, Black Ptfe (2') Wire, 22 Awg Stranded Silver-Plated Copper, White Ptfe (1) Professional, Fully-Illustrated Wiring Diagram