Twin Cylinder 2-Stage Air Compressor Head 4KW 5.5HP Replacement Air Compressor Pump for Factories Auto Repair Painting

Specifications Air delivery: 8~11CFM Rated pressure: 175 PSI (1.16MPa) Driving power: 4KW (5.5HP) Pump speed: 800RPM Cylinder diameter: 3.54" (90mm) Distance of screw hole: 26cm*14cm (10.2"*5.5") Rated exhaust volume: 0.6L/Min Note: If the motor speed is 2880rpm, the diameter of the motor wheel is 10 cm. If the motor speed is 1440rpm, the motor wheel is 20 cm Package Included 1* Air Compressor Pump head Installation Notes 1.When placing the pump head, the motor pulley and belt pulley must be in the same straight line. The more aligned they are, the smaller the vibration will be. 2.All screws (including base and pulley screws) need to be tightened to install the pump head. 3.Tighten the belt after installing the screw. If the belt is loose, please move the motor, tighten the screw, and then re-install the belt. 4.The new machine must be filled with oil before starting up, and the oil should be added to the center of the red spot of the oil mirror. 5.The rotation direction of the pump head is clockwise. If it is reversed, please adjust it in time. 6.The first half-month oil change, the second one and a half months oil change, after two to three months oil change. 7.The air filter should be replaced regularly for two to three months in normal conditions and one month in poor environment. 8. Machine operation will produce high temperature, beware of scalding!

• 【Main Parameters】Driving power: 4KW (5.5HP) ;Pump speed: 800RPM; Rated pressure: 175 PSI (1.16MPa); Air delivery: 8~11CFM; Cylinder diameter: 3.54" (90mm); Distance of screw hole: 26cm*14cm (10.2"*5.5"); Rated exhaust volume: 0.6L/Min. Distance of screw hole: 26cm*14cm (10.2"*5.5");Rated exhaust volume: 0.6L/Min
• 【Good Cooling Performance】The cooling blade is strong and has good cooling performance. Widely used in factories, home improvement, auto repair, painting and other industries
• 【High Efficiency】This twin-cylinder air compressor head is fast filling and low noise. In addition, it also has the advantages of high efficiency, high precision, low energy consumption and high versatility
• 【Smooth Operation】The hair piece is made of special valve steel, which has good strength and toughness under high temperature. At the same time, strict balance support and correction to ensure the smooth operation of the host and improve efficiency
• 【Durable and Sturdy】The head of this twin-cylinder air compressor is made of high-quality material, which is durable and not easy to be damaged. You can save money by using it for a long time without replacing it with a new one